Chapter   Topic
Comparing Temperature / Cone Systems
Go to contents

Various types of cones are available for monitoring a firing. Matrix contains information which will enable you to translate a cone / temperature indicator from one system into another. Fig. 1 shows the Cone / Temperature window which can be opened by clicking the button on the Tool Bar.

Fig.1 Cone / Temperature Window

This window contains two sets of controls:

The Cone Type drop-down box has a selection of different cone types. When you change the selection the temperature readings related to the cone number changes.

The Units radio buttons allow you to move from Celcius to Fahrenheit

Temperature rise per hour (ramp)
Information supplied with Orton's large cones includes two different cone/temperature relationships depending on the average rate over temperature rise over the last two hours of the firing.

Follow these links for more information about:

  • Temperature / Cone Displays
  • Setting the Temperature
  • Comparing Temperature / Cone Scales
  • Setting A Target Temperature in the Limits Graph window ...
Temperature / Cone Systems
Setting Temperature / Cone Displays | Comparing Temperature / Cone Scales